【Echo Tech】 ZO series × 3D Printed materials
PLEASE NOTICE THAT ZO SERIES PERFORMANCE AND USER’S FEELING ON WORK CHANGES DEPENDING ON ANY OF CONDITION.
(USER, WORKING TIME, BLADE’S CONDITION, TYPE AND ANGLE, MATERIAL’S THICKNESS, UNIT’S POWER MODE AND DETERIORATION LEVEL, etc.)
Press listed Material name below for quick access to corresponded page.
| 3D PRINTED MATERIAL TYPE (Alphabetic order) |
| ABS (FDM/FFF) |
| ASA (FDM/FFF) |
| Resin (SLA) |
Ultrasonic cutter ZO series × 3D printed ABS, ASA, Resin (FDM/FFF/SLA)
Ultrasonic cutter ZO series × 3D printed materials
3D printed Resin cutting test.
ABS (FDM/FFF)
3D printed ABS can be cut smoothly with ZO-91 and ZO-95 with any blades for 2mm thickness max.
To reduce plastic melting, Thin blade ZH14 or Thin long blade ZH16 are recommended.
【Echo Tech】 Thin blade ZH14 & Thin long blade ZH16 | Echo Tech
Press this link for access to normal ABS page.
【Echo Tech】 ZO series × Plastic | Echo Tech
ASA (FDM/FFF)
3D printed ASA can be cut smoothly with ZO-91 and ZO-95 with any blades for 1mm thickness max. Compared with ABS, it needs little power to cut, and it melts larger.
To reduce plastic melting, Thin blade ZH14 or Thin long blade ZH16 are recommended.
【Echo Tech】 Thin blade ZH14 & Thin long blade ZH16 | Echo Tech
Resin (PVC)
3D printed ABS can be cut smoothly with ZO-91 and ZO-95 with any blades for 1mm thickness max. Compared with ABS, it needs little power to cut, and the part where it cut might collapsed into tiny pieces.
To make cut surface clean, Thin blade ZH14 or Thin long blade ZH16 are recommended.
【Echo Tech】 Thin blade ZH14 & Thin long blade ZH16 | Echo Tech
投稿者プロフィール
