Ultrasonic cutter ZO-91 (Standard model)

Ultrasonic cutter ZO-95 (Professional model)

(Special attachments for ZO-95)
1. Torque screwdriver ZH25T　　　　   2. Foot switch ZH801

*1 Ultrasonic cutter ZO series overseas models are intended to sell at CE standard region. The power cord has complied to CE standard. To use at other regions which have complied other standards, please replace and use complied power cord. Also, we might be able to replace power cord that complied to your country’s standard with optional fee, when we had request.

*2 Do not use S-High and High mode for long time or as regularly. Because it loads largely, it shortens a life of unit.

Replacement blades and options for ultrasonic cutter

Replacement blades and options

			ZO-91	ZO-95
Blade	HA04	Standard blade (40 pcs. set)	◎	◎
	HA07	Cemented carbide blade	◎	○
	HA08	Square blade	◎	○
	HA09	Long blade	☓	☓
	ZH10	Long blade (25 mm)	◎	◎
	HA10	Round tip blade	◎	○
	ZH09	Round tip blade (R 15)	◎	○
	ZH05	Flat blade (1 mm)	◎	○
	ZH06	Flat blade (2 mm)	◎	○
	ZH07	Flat plate (1 mm)	◎	○
	ZH08	Flat plate (2 mm)	◎	○
	ZH11	Saw blade ※Discontinued manufacturing※	◎	○
	ZH37	Saw blade	◎	○
	ZH03	Curving blade (4 mm/R 5)	◎	○
	ZH18	Curving blade (1 mm)	◎	○
	ZH19	Curving blade (2 mm)	◎	○
	ZH20	Curving blade (3 mm)	◎	○
	ZH12	Square pyramid	◎	○
	ZH14	Thin blade(5 pcs. set)	N	N
	ZH16	Thin long blade(5 pcs. set)	N	N
	ZH23	Filing plate #325 (4 mm)	◎	○
	ZH34	Filing plate #325 (1 mm)	◎	○
	ZH35	Filing plate #325 (2 mm)	◎	○
	ZH36	Filing plate #325 (3 mm)	◎	○
	ZH39	Electrodeposited filing plate with square pyramid	◎	○
	ZH38	Welding blade (2 mm)	◎	○
	ZH44	Double-edged triangular pyramid	◎	○
	ZH42	Round tip blade	◎	○
	ZH45	Circular tip φ0.4 blade	◎	○
	ZH47	Electrodeposited filing plate with round tip blade(#325)	◎	○
	ZH48	Zirconia ceramic blade	◎	○
	ZH49	Electrodeposited filing plate with curving blade 1 mm	◎	○
	ZH41	Square blade	◎	○
	ZH01A	Sharp edge blade 16°	N	N
	ZH52	Flat round blade	N	○
Grinding stone	ZH24	Grinding stone #800 Color: Blue	N	N
	ZH26	Grinding stone #120 Color: Green	N	N
	ZH27	Grinding stone #180 Color: Gold	N	N
	ZH28	Grinding stone #300 Color: Brown	N	N
	ZH29	Grinding stone #400 Color: Orange	N	N
	ZH30	Grinding stone #600 Color: Gray	N	N
	ZH31	Grinding stone #1000 Color: White	N	N
	ZH32	Grinding stone #1200 Color: Red	N	N
	ZH51	Grinding stone #80 Color: Purple	N	N
	ZH55	Grinding stone bar #80 Color: Purple	N	×
	ZH56	Grinding stone bar #120 Color: Green	N	×
	ZH57	Grinding stone bar #180 Color: Gold	N	×
	ZH58	Grinding stone bar #300 Color: Brown	N	×
	ZH59	Grinding stone bar #400 Color: Orange	N	×
	ZH60	Grinding stone bar #600 Color: Black	N	×
	ZH61	Grinding stone bar #800 Color: Blue	N	×
	ZH62	Grinding stone bar #1000 Color: White	N	×
	ZH63	Grinding stone bar #1200 Color: Red	N	×
Blade anchor	ZH04	Standard blade anchor for ZO series	◎	◎
	ZH15	Thin blade anchor for ZO series	N	N
	ZH53	Bar anchor for ZO series	–	–

			ZO-91	ZO-95
Blade anchor screw	HB03		◎	◎
Hexagon wrench	RR02		◎	◎
Hexagon wrench	RR03		☓	☓
Torque screwdriver	ZH25T		◎	◎
	ZH25T2		◎	◎
Goggle	ZH13		◎	◎
Cutting mat	CM02		◎	◎
Carrying case	CB02		☓	☓
	ZH804		☓	◎
	ZH46		◎	☓
Maintenance set	SB01	Abrasive paper x 3, Cleaning bar x 1	◎	◎
Maintenance set	SB02	Abrasive paper x 10	◎	◎
Blade anchor and set items	ZH04S	Blade anchor set ・Blade anchor ZH04 x 1 ・Blade anchor screw HB03 x 1 ・Hexagon wrench RR02 x 1	◎	◎
	ZH14S	Thin blade set ・Thin blade ZH14 (5 pcs.) x 1 ・Blade anchor ZH15 x 1 ・Blade anchor screw HB03 x 1	N	N
	ZH14SG	Thin blade and goggle set ・Thin blade ZH14 (5 pcs.) x 1 ・Blade anchor ZH15 x 1 ・Blade anchor screw HB03 x 1 ・Goggle ZH13 x 1	N	N
	ZH15S	Blade anchor for thin blade set ・Blade anchor ZH15 x 1 ・Blade anchor screw HB03 x 1 ・Hexagon wrench RR02 x 1	N	N
	ZH16S	Thin long blade set ・Thin long blade ZH16 (5 pcs.) x 1 ・Blade anchor ZH15 x 1 ・Blade anchor screw HB03 x 1	N	N
	ZH16SG	Thin long blade and goggle set ・Thin long blade ZH16 (5 pcs.) x 1 ・Blade anchor ZH15 x 1 ・Blade anchor screw HB03 x 1 ・Goggle ZH13 x 1	N	N

-Remarks-
“◎” indicates that blade is corresponding to all power modes.
“○” in ZO-95 column indicates that blade can use for ZO-95 Normal mode and High mode, but not for S-high mode.
“N” in ZO-91 and ZO-95 columns indicates that blade can use for ZO-91 and ZO-95 Normal mode only.

*1 Blade vibration might be weakened when it has pressed strongly to working material.

Catalog page.

Website shop

Rakuten (Japanese online shop site)

In Rakuten page, it all written with Japanese and English both.

・ZO-91 model
【楽天市場】海外用超音波カッター ZO-91(CE対応品) Ultrasonic cutter ZO-91(CE) Cut plastic like butter. Oversea use model.：超音波と魚探のus-dolphin (rakuten.co.jp)

・ZO-95 model
【楽天市場】【替え刃特典付】海外向けホビー用超音波カッターZO-95(CE対応品) 【Attached replacement blade】 Ultrasonic cutter overseas model ZO-95(CE)：超音波と魚探のus-dolphin (rakuten.co.jp)

Amazon (Japanese online shop site)

In Amazon page, it all written with Japanese and English both.

・ZO-91 model
Amazon.co.jp: Ultrasonic cutter ZO-91 海外用超音波カッター ZO-91 : DIY・工具・ガーデン

・ZO-95 model
Amazon | Ultrasonic cutter ZO-95 海外用超音波カッター ZO-95 | カッター

Echo Tech HP shop (Japanese page)

In Echo Tech HP shop, it all written with only Japanese.

・ZO-91 model
《販売中》●海外向けﾎﾋﾞｰ用小型超音波ｶｯﾀｰZO-91 | エコーテック株式会社 (echotech.co.jp)

・ZO-95 model
《販売中》●海外向けﾎﾋﾞｰ用超音波ｶｯﾀｰZO-95 | エコーテック株式会社 (echotech.co.jp)

Place order directly to us.

You could place order or request for repair directly to us.
Please send us your information from contact form or via email.
(Needed information: Name, Email address, Order product, Shipping address, TEL number)
We could not ship product if any information were missed.

Contact form | Echo Tech

Email: worldinfo@us-dolphin.co.jp

After we received order, we will send you a proforma invoice data.
We will ship product after confirming payment on our account.

Unit repair and Warranty

You could request unit repair directly to us.
(We might pass your request to our distributors or other shops located in your country)

Repair flow

①Make us contact.
　Send us customer’s information and symptom of troubled unit. It’s helpful if we could have
　troubled unit’s movie.

※We do not accept repairs for all units except ZO-91 and ZO-95 used at countries not Japan.

②We reply to customer a troubleshooting and conceivable cause.

③Send us troubled unit.
　If it doesn’t activate normally even if you tried troubleshooting, it might need our repair.

Before you send back us unit, please notice things mentioned below.

・Do not disassemble a unit.
・Please set blade and blade anchor screw on hand piece, tightening with proper torque level.
・The customer is responsible for shipping fees.
・Please send back us all accessories which was contained in unit box initially.
・Once we start inspection, customer will be charged inspection fee even if they don’t ask for repair.

④Unit inspection.
　After troubled unit has reached to us, we start inspection. (= Customer will be charged
　inspection fee) After finished unit inspection, we inform customer of trouble’s cause with 　repair estimation.

Please let us know whether you request for repair or not.

⑤Payment, Unit repair and shipping back unit

(Request for repair)
Customer will be charged for total of repair + inspection + shipping fee.
After we confirmed your payment on our account, we start repair.

(No request for repair)
Customer will be charged for total of inspection + shipping fee.
After we confirmed your payment on our account, we ship back customer’s unit soon.

1 year warranty.

We will cover repair and inspection fee for units that meets following conditions.
Customer will be charged round-trip shipping fee even if the unit has warranted.

・The broken unit model is ZO-91 or ZO-95.

・The broken unit has not passed 1 year from our shipping date.
　We are recording each units shipping date and we could search on our database.

・Unit has broken, because of not user’s fault.
　This detail has mentioned on unit’s manual.

Ultrasonic atomizer unit (humidify/atomize) JMU series.

This product is an unit, containing in ultrasonic atomize JM series.
Please use in university or research institution’s experiment or as appliance attachment.

　　  Series name　　　　　　　 Frequency　 Structure  Material　Version

JMU・・・series name(unit of JM series)

■Frequency
24：Central frequency　2.4MHz
30：Central frequency　3.0MHz

■Structure
A： Upper type(Mist direction)

■Material(surface treatment method)
0： Resin coating(Corresponded to Hypochlorous acid water 50ppm/weak acidity ~ neutral)

■Ver．(Revised No. of substrate or attachments)
1： Released in Sep. 2021

About sales of Ultrasonic atomizer unit (humidify/atomize)

Ultrasonic atomizer unit made by Honda Electronics group has developed, start from our wish of “make rainbow to the air with ultrasonic technology(Rainbow project)”.
To atomize and spray water to the air, the unit developed as own company’s assembly part of ultrasonic atomizer has released as ultrasonic atomizer unit.
Rainbow project

We released atomizer unit as retail product in 1st August 1998, corresponding to requests of selling atomizing unit to make fog, from companies and universities research division which orders a original apparatus.
It could purchase from single piece and adopt in something experiment, it has used by peoples from various fields for long years.
However, due to some factors such as electronic component’s combination, reorganization, stockless, decrease of market place, we are now at hard situation to produce HMC series.
It has also considered to discontinue producing, but we determined to keep selling ultrasonic atomizer unit by standardizing with JM series that we(Echo Tech) are handling.

■Difference between HMC series.
・Current value will be decrease.
・Capability of atomization will be decrease.
・Oscillation circuit parts become chip.
・Fixing screw will be only correspond to M3, but not M4.
・Diagonal transducer type will be discontinue to produce.
This product will be only sell from Echo Tech. You could not order from Honda Electronics.

What is Ultrasonic atomizer unit?

　Ultrasonic atomizer unit transmits high frequency ultrasonic energy to water, and water pillar rises up by water molecule acceleration. The edge of water pillar atomizes and become mist. It is a set product of oscillator substrate that activates ultrasonic transducer and transducer, considered assembling in machine that atomizes liquid using this phenomenon.
※Please check picture of atomization at Honda Electronics website(Japanese page).
　Ultrasonic handbook　Humidify ・ Solution atomization(Japanese page)

■Components of Ultrasonic atomizer unit　JMU-24A01 

・Ultrasonic transducer ＋ Packing ＋ Transducer cover(Left side on pic.)
・Oscillation circuit(Front, center on pic.)
・2.4MHz horn(Back, center of pic.)
・Power cord(red-black), Cord using for float(blue-blue)(Right side on pic.)

Ultrasonic atomizer unit　2.4MHz/3.0MHz

This product is an unit assembled in Ultrasonic atomizer JM series, which we are selling.
The 3.0 MHz which we used to accept as special order has newly added in lineup.
From the graph that describes measure of atomized particle size, it could know that much more small size particle has atomized than conventional models. 

※There are similarity with HM series (HM1630/HM2412/HM2412C) and HMC series (HM-2400/HM-2401) which had been sold by Honda Electronics, but because the mist volume has decreased, there are no compatibility.
For conventional models(HM-2400/HM-2401) users, 30st August, 2022 is a last day of those model’s order acceptance. Please prepare for placing last lot order.
※Due to the change in the Ultrasonic atomizer JM series, specification or appearance might be change without noticing.
Mist particle size for each frequency(Measure with assembled in JM-200 case)

※Contained in Ultrasonic atomizer JM-200, and it’s a graph measured particle size changing the unit. We do not provide detailed measure data to outside, but you could know from this graph that particle size changes depends on the frequency level.

2.4MHz　Model：JMU-24A01

Retail price：JPY14,800 (Out of tax)
Frequency：2.4MHz
Power input：DC24V
Consumption power：12VA
Atomize capability(Reference value)(※1)：
・Approx. 80ml/h (Normal)
・Approx. 250ml/h (Attached horn)
(※1)
　Atomize capability is a reference value and it’s not a value we ensure.
　Due to product’s individual difference, atomize capability is not perfectly uniform.
　Depends on water tank shape, type of solution, atomize capability will increase or decrease.
　Please check the atomize capability first.
Proper water level：
・Transducer – Water surface　36mm±5mm (Normal)
・Transducer – Water surface　43mm±5mm (Attached horn)
Central atomized particle size： Under 3μm
Ambient temperature(※2)：5℃～35℃(No condensation)
(※2)
　Ambient temperature is not a value that ensures product performance.
　When the liquid get frozen, transducer will become condition of No-water burning or transducer might broke compressed by ice.
Substrate cooling system： Compulsive cooling with fan
Measurement： Substrate ・ Heat sink：W38 mm × L30 mm × H36±3 mm
Accessories：
・Oscillation circuit board (mass： approx. 10g)
・JMU-24A01 transducer ASSY (mass： approx. 9g)
・Power bundled wire (mass： approx. 3g)
・Float switch bundled wire (mass： approx. 3g)
・Horn (mass： approx. 2g)

※The surface of transducer is flat. Water pillar rises up straightly.
★JMU-24A01　Manual PDFJMU24A01_202106 ver. manual (Japanese page)

3.0MHz　Model：JMU-30A01

Retail price： JPY16,800(Out of tax)
Frequency： 3.0MHz
Power input：DC24V
Consumption power： 14VA
Capability of atomization (Reference)(※1)：
・Approx. 60ml/h (Normal)
・Approx. 220ml/h (Attached horn)
(※1)
　Atomize capability is a reference value and it’s not a value we ensure.
　Due to product’s individual difference, atomize capability is not perfectly uniform.
　Depends on water tank shape, type of solution, atomize capability will increase or decrease.
　Please check the atomize capability first.
Proper water level：
・Transducer ー Water surface　44mm±5mm (Normal)
・Transducer － Water surface　42mm±5mm (Attached horn)
Central atomized particle size： Under 2.8μm
Operating temperature limit(※2)：5℃～35℃(No condensation)
(※2)
　Ambient temperature is not a value that ensures product performance.
　When the liquid get frozen, transducer will become condition of No-water burning or transducer might broke compressed by ice.
Substrate cooling system： Compulsive cooling with fan
Measurement： Substrate ・ Heat sink：W38 mm × L30 mm × H36±3 mm
Accessories：
・Oscillation circuit board (mass： approx. 10g)
・JMU-30A01 transducer ASSY(mass ： approx. 9g)
・Power bundled wire (mass： approx. 3g)
・Float switch bundled wire (mass： approx. 3g)
・Horn (mass： approx. 2g)

※The surface of transducer is flat. Water pillar rises up straightly.

★JMU-30A01　Manual PDF JMU30A01_202106t manual (Japanese page)

■How to assemble transducer.

Ultrasonic atomizer unit JMU series supplying system

We have a limit on capability of producing. We could not accept for over 1,000 units order in per month.
If our condition has matched, we supply to company which is producing competitive products such as ultrasonic atomizer, ultrasonic humidifier, ultrasonic dispenser, that purposed to spray solutions.

September 2021　Start test sales of trial mass production
December 2021　Start mass production
※We have few stocks, and when we don’t have materials to produce component, it takes 4 to 　5 months until we supply.
　Since electronic components are hard to stock now, it might takes over half of year.
　If you need stock now, please place order as soon as possible.

※Old models　We have few components of HM-1630/HM-2412/HM-2412C/HMC-2400/HMC-2401 for after service. For users who could not change unit because of using for experiment, we could supply maintenance components if we had stock. Please make us contact.

Ultrasonic atomizer JMU series selling system

Our group company, Honda Electronics were being reception, but we will integrate window to Echo Tech.
Honda Electronics will not handle this ultrasonic atomizer unit. We could only supply directly, or via our distributors.
We accept only transaction of prepaying.
If you would like to do credit sale in Japan, please make contact us or here.

・計測器・理化学機器専門の通販サイト　テックジャム

Event information

・2020.1.29. – 2020. 2.2. Spielwarenmesse 2020 (Nuremberg, Germany)
(Report video) https://youtu.be/jpTqcGk92gg

・2022.10.26. – 2022.10.30. Modellbaumesse 2022 (Wien, Austria)

・2022.11.8. – 2022.11.13. JIMTOF (Tokyo, Japan)

・2022.12.3. – 2022.12.4. Christmas Fest. (Shizuoka, Japan)
 

Catalogue